THE VIP-60
The Return of a Legend
“It’s a beautiful microphone, i love these mics.”
Dan Malsch
Billboard # 1 and 3x Grammy Nominee.
Credits include Ghost, Avenged Sevenfold,
Gojira, and Bowling For Soup.
Price is excluding VAT.
VAT will be added at checkout. All taxes, customs duties, import fees, and any applicable tariffs are the responsibility of the customer.
Basic free shipping paid by Milab.
The VIP-60 is built for moments that matter. Nearly four decades after the VIP-50, this is the next evolution. Lower noise, greater precision, and a sound that feels natural from the first take.
It captures detail without harshness, depth without mud, and presence without hype. Vocals sit exactly where they should. Instruments keep their character. What you hear in the room is what you get in the recording.
Five polar patterns, carefully tuned filters, and pre-attenuation pads give you full control in any situation. From intimate vocals to loud sources, the VIP-60 adapts without compromise.
Hand-built in Sweden. Designed to be the centerpiece of your studio.
If you care about how your recordings actually feel, this is where you stop looking.
Included
Rycote InVision USM shockmount
Individual frequency response graph
Factory-matched pairs available. Order two and then send us an e-mail to milab@milabmic.com
Technical Specifications
Product name:
Milab VIP-60
Type:
Condenser
Article number:
1160
Frequency response:
20 to 20,000 Hz
Polar pattern:
Cardioid, Wide Cardioid, Hypercardioid, Omni, Bidirectional
Filters:
200 Hz & 500 Hz (switchable)
Pre-attenuation pad:
-10 dB & -20 dB (switchable)
Max. SPL (1 % THD at 1 kHz):
118 dB
Max SPL with 10 dB pad:
128 dB
Max SPL with 20 dB pad:
138 dB
Sensitivity at 1 kHz:
14 mV/Pa (± 1 dB)
A-weighted noise level (IEC 179-A):
14 dB
Power supply:
48 ± 4 V Phantom (DIN/IEC)
Current consumption:
4 mA
Output impedance:
<200 Ω
Minimum load impedance:
1 kΩ
Connection:
3-pin XLR
Length:
170 mm
Width:
47 mm
Depth:
50 mm
Net weight:
400 g
Price is excluding VAT.
All taxes, customs duties, import fees, and any applicable
tariffs are the responsibility of the customer.
Basic free shipping paid by Milab.
Price is excluding VAT.
VAT will be added at checkout. All taxes, customs duties, import fees, and any applicable tariffs are the responsibility of the customer.
Basic free shipping paid by Milab.
The VIP-60 is built for moments that matter. Nearly four decades after the VIP-50, this is the next evolution. Lower noise, greater precision, and a sound that feels natural from the first take.
It captures detail without harshness, depth without mud, and presence without hype. Vocals sit exactly where they should. Instruments keep their character. What you hear in the room is what you get in the recording.
Five polar patterns, carefully tuned filters, and pre-attenuation pads give you full control in any situation. From intimate vocals to loud sources, the VIP-60 adapts without compromise.
Hand-built in Sweden. Designed to be the centerpiece of your studio.
If you care about how your recordings actually feel, this is where you stop looking.
Included
Rycote InVision USM shockmount
Individual frequency response graph
Factory-matched pairs available. Order two and then send us an e-mail to milab@milabmic.com
Technical Specifications
Product name:
Milab VIP-60
Type:
Condenser
Article number:
1160
Frequency response:
20 to 20,000 Hz
Polar pattern:
Cardioid, Wide Cardioid, Hypercardioid, Omni, Bidirectional
Filters:
200 Hz & 500 Hz (switchable)
Pre-attenuation pad:
-10 dB & -20 dB (switchable)
Max. SPL (1 % THD at 1 kHz):
118 dB
Max SPL with 10 dB pad:
128 dB
Max SPL with 20 dB pad:
138 dB
Sensitivity at 1 kHz:
14 mV/Pa (± 1 dB)
A-weighted noise level (IEC 179-A):
14 dB
Power supply:
48 ± 4 V Phantom (DIN/IEC)
Current consumption:
4 mA
Output impedance:
<200 Ω
Minimum load impedance:
1 kΩ
Connection:
3-pin XLR
Length:
170 mm
Width:
47 mm
Depth:
50 mm
Net weight:
400 g
MILAB VIP-60
Hand-built in Sweden, the VIP-60 delivers a rare balance of clarity, depth, and musicality. It captures performances exactly as they feel, with detail that stays natural and never harsh.
Every component is designed for creators who care about both precision and emotion. The capsule responds instantly to dynamics, preserving the smallest nuances, from intimate vocals to powerful takes.
It doesn’t hype your sound.
It reveals it.
VIP-60 VOcal Session
Providing an honest representation of the sound, the vocal track only has a little compression and some reverb, nothing else.
Milab VIP-60
The Milab VIP-60 combines the classic sound of the vintage VIP-50 with low noise and the latest technology. Learn the background story of Milab's top model.
MILAB VIP-60
Price is excluding VAT.
VAT will be added at checkout. All taxes, customs duties, import fees, and any applicable tariffs are the responsibility of the customer.
Basic free shipping paid by Milab.
The VIP-60 is built for moments that matter. Nearly four decades after the VIP-50, this is the next evolution. Lower noise, greater precision, and a sound that feels natural from the first take.
It captures detail without harshness, depth without mud, and presence without hype. Vocals sit exactly where they should. Instruments keep their character. What you hear in the room is what you get in the recording.
Five polar patterns, carefully tuned filters, and pre-attenuation pads give you full control in any situation. From intimate vocals to loud sources, the VIP-60 adapts without compromise.
Hand-built in Sweden. Designed to be the centerpiece of your studio.
If you care about how your recordings actually feel, this is where you stop looking.
Included
Rycote InVision USM shockmount
Individual frequency response graph
Factory-matched pairs available. Order two and then send us an e-mail to milab@milabmic.com
Technical Specifications
Product name: Milab VIP-60
Type: Condenser
Article number: 1160
Frequency response: 20 to 20,000 Hz
Polar pattern: Cardioid, Wide Cardioid, Hypercardioid, Omni, Bidirectional
Filters: 200 Hz & 500 Hz (switchable)
Pre-attenuation pad: -10 dB & -20 dB (switchable)
Max. SPL (1 % THD at 1 kHz): 118 dB
Max SPL with 10 dB pad: 128 dB
Max SPL with 20 dB pad: 138 dB
Sensitivity at 1 kHz: 14 mV/Pa (± 1 dB)
A-weighted noise level (IEC 179-A): 14 dB
Power supply: 48 ± 4 V Phantom (DIN/IEC)
Current consumption: 4 mA
Output impedance: <200 Ω
Minimum load impedance: 1 kΩ
Connection: 3-pin XLR
Length: 170 mm
Width: 47 mm
Depth: 50 mm
Net weight: 400 g
